Xerox DC240 - DocuColor 240 Color Laser Примітка до випуску - Сторінка 14

Переглянути онлайн або завантажити pdf Примітка до випуску для Сканер Xerox DC240 - DocuColor 240 Color Laser. Xerox DC240 - DocuColor 240 Color Laser 34 сторінки. Overview of the control panel buttons.
Також для Xerox DC240 - DocuColor 240 Color Laser: Посібник із швидкого старту (2 сторінок), Посібник із заміни обладнання (2 сторінок), Посібник із швидкого старту (2 сторінок)

Page 14

Manual Duplex

To print with the Manual Duplex option using Tray 5 (Bypass), you ﬁrst print all the odd-

numbered pages single-sided. Then a message appears in Command WorkStation that asks

you to "place odd sheets in Tray 5." Take the printed odd-numbered pages and load them into

Tray 5 (after ﬁrst removing any blank sheets) to print the even-numbered pages on the blank

sides. For more details about how to orient the pages, see Print Options.

The message displayed at the copier does not specify that you must load the odd-

OTE

numbered sheets to print side 2. See the message displayed in Command WorkStation

or Job Monitor instead.

Mixed Media and collation

To collate a job when you print using Mixed Media settings, do not set the Collate option in

the Print dialog. Instead, set the Collate option in the Fiery Printing tab.

Mixed Media, Duplex, and Orientation

For a Mixed Media job in which some pages are oriented Portrait and others are oriented

Landscape, duplex pages might not print with the correct orientation.

Media Type selections dimmed (Windows)

In the Windows printer drivers, a Media Type setting appears dimmed if there are other print

options selected that would be in conﬂict with that Media Type setting. You can still select a

dimmed setting, and you can have the printer driver resolve the conﬂict automatically.

Face-Down Printing and custom page size

If you print to a custom page size and set the Face-Down Printing option to Face Down, the

page dimensions must be within the following ranges, otherwise the job is printed Face Up:

• Width: 139.7 to 330 mm

• Length: 182 to 488 mm

Paper size

When you send a job from an application that allows you to specify paper size in the

Print dialog box (such as Microsoft Word), select the same paper size in both the application's

Page Setup dialog box and the printer's Properties dialog box.

Before printing your job, verify that the paper size selection in Document Setup and

Page Setup are the same. This will resolve problems with the printed output, such as

image clipping and unintentional scaling.

Part Number: 45045321