Xerox Synergix 8825 Посібник з програмного забезпечення - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Програмне забезпечення Xerox Synergix 8825. Xerox Synergix 8825 30 сторінок. Windows nt 4.0 postscript print driver user guide
Також для Xerox Synergix 8825: Посібник оператора (48 сторінок), Посібник з налаштування (20 сторінок), Примітка до випуску (23 сторінок), Додатковий посібник (26 сторінок)

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide

Driver Configuration (Printer Properties Dialog)

Device Settings Parameters

The Device Settings tab of the Printer Properties dialog contains a number of

configurable device settings.

Form to Tray Assignment

Manual Feed Setting - Lets you set the size of the manual feed option

on the printer if the printer is so equipped. It is recommended that you

leave this setting at the default of letter.

Roll Settings - Use these parameters to set up the driver with the sizes

of media rolls installed in the printer. For the 8855 printer there will

typically be four Rolls to set. It is recommended that you leave this

setting at the default of letter.

Font Substitution Table - Displays a list of your system-installed fonts and

the printer-resident fonts set for their replacement if you choose Substitute

with Device Font in the True Type Font parameter of the Advanced Tab of the

Document Properties Dialog as stated in this Guide.

Available PostScript Memory - Specifies the amount of PostScript memory

which is a subset of total printer physical memory. The driver uses this

information when performing printing tasks, such as sending fonts from the

computer to the printer. Unless PostScript printing problems are occurring, it

is best if the default setting of 2048 kilobytes is used. The range for this

setting is 249 to 32767KB.

Figure 3. Typical Device Settings Tab