Xerox Phaser EX7750 Посібник із швидкого старту - Сторінка 19
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сервер друку Xerox Phaser EX7750. Xerox Phaser EX7750 28 сторінок. Phaser with efi fiery network color server
Також для Xerox Phaser EX7750: Детальні технічні характеристики (4 сторінок), Посібник з налаштування (2 сторінок)
Друкувати сторінку
11 Preparing to print
Downloading EX7750 firmware
New firmware is downloaded to the printer the first time you connect the EX7750 to
the printer and power on the system.
T
EX7750
O DOWNLOAD
FIRMWARE
1. Power on the EX7750 using the power switch.
2. Power on the printer.
The first time you power on, the EX7750 automatically downloads firmware to
N
:
OTE
the printer. The following occurs, in this order:
• In approximately two minutes the EX7750 automatically begins to download
firmware to the printer. The message "PROCESSING DATA-PLEASE WAIT"
displays on the printer front panel.
• The printer prints a Caution page and displays the message "Caution! Downloading
ROM. This takes several minutes. DO NOT INTERRUPT!" Do not interact with
the EX7750 or the printer during this time.
• Download progress displays: "Download 50%. DO NOT INTERRUPT!"
• The message displays "Firmware upgrade completed. Printer will reboot in 5
seconds!" The printer reboots. An EX7750 test page prints automatically.
Changing the language on the EX7750
If a language other than English is required on the EX7750, you must reinstall system
software using the desired language System Software CDs provided in the media pack.
For more information, see the
Configuration
Guide.