Clarity SMA-40 Посібник

Переглянути онлайн або завантажити pdf Посібник для Підсилювач Clarity SMA-40. Clarity SMA-40 5 сторінок.

(540) 427-3505
40, 60, AND 120 WATT MIXER-AMPLIFIERS
INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and maintain
the SMA-40, 40 Watt Mixer-Amplifier, the SMA-60,
60 Watt Mixer-Amplifier and the SMA-120, 120 Watt
Mixer-Amplifier manufactured by Clarity, 1111
Industry Avenue., Roanoke, VA 24013.
"WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture."
"WARNING: Shock Hazard - Do Not Open."
"AVIS: Risque de Choc Electrique ne pas Ouvrir."

SPECIFICATIONS

Purpose
The SMA-40 Mixer-Amplifier provides up to 40 watts
of audio power, the SMA-60 provides 60 watts, and the
SMA-120 provides up to 120 watts of audio power for
voice paging or background music systems.
Applications
Clarity Paging and Sound Reinforcement Systems
Clarity Stand Alone Background Music Systems
Refer to Figure 1 for a block diagram of a typical
installation.
Features
Active mix or Priority override on inputs (override
is voice operated)
Shelf or rack mount (optional kit)
Mic 1/Tel on Input 1, 3 standard MIC/AUX
inputs
Volume control for each input
Master volume control
Bass control
Treble control
Circuit breaker protection
ON/OFF switch
Overload limiting circuit protection
SMA-40, SMA-60, SMA-120
Screw terminals for all connections
Power "ON" indicator
2 ohm, 25 and 70 volt outputs on the SMA-120
4 ohm, 25 to 70 volt outputs on the SMA-40 and
SMA-60
Knobs for all controls
Clipping indicator
Effects loop
Tape output
Booster output

Dimensions and Weight

17.1"W x 12.5"D x 3.9"H
(43.43cm W x 31.75cm D x 9.9cm H)
24 lbs. (10.8 Kg) - SMA-120
20 lbs. (9.1 Kg.) – SMA-40 and SMA-60

Power Requirements

Voltage
Current (SMA-40)
(SMA-60)
(SMA-120)
Environment
Temperature
Humidity
1
CSP SMA-40/60/120
Issue 4
120 VAC
1.0 Amps
1.6 Amps
3.0 Amps
0 to 50 Degrees C
0 to 85% non-precipitating
947408