CLARIUS IS-9-P Посібник зі швидкого встановлення
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Освітлювальне обладнання CLARIUS IS-9-P. CLARIUS IS-9-P 2 сторінки. Infrared & white light led illuminators
Друкувати сторінкуClarius
Infrared & White Light LED Illuminators
IS-8 / IS-9 / IS-8-P / IS-9-P
IM-8 / IM-9 / IM-8-P / IM-9-P
IL-8 / IL-9
IX-8 / IX-9
Quick Installation Guide
w: www.gjd.co.uk
t: +44 (0) 1706 363 998
Unit 2, Birch Business Park, Whittle Lane, Heywood, Greater Manchester, OL10 2SX, UK
SPECIFICATION
Electronics
High efficiency surface mount high power LEDs with
advanced current limited integral control circuitry
Beam Angles
10º, 30°, 60° & 95°
Lens/Beam Pattern
The illuminator should be matched to the scene and
the camera lens focal length
Wavelength
850nm and visible white light 940nm and visible white
light
Expected Life
10 years
Consumption
Clarius IS / Clarius VS
Clarius IM / Clarius VM
Clarius IL / Clarius VL
Clarius IX / Clarius VX
Input Voltage
12-32V DC or 24V AC 50-60 Hz
Operating Temp
-50° to 50° (-58° to 122°F)
Environmental
IP66. Suitable for indoor and outdoor use
Construction
Robust high quality aluminium extrusion
Front Window
Polycarbonate high transmittance protection (vandal-
proof) with CleanLITE
Dimensions
Clarius IS/Clarius VS 68 x 110 x 78mm
Clarius IM/Clarius VM 114 x 110 x 78mm
Clarius IL/Clarius VL 161 x 110 x 78mm
Clarius IX/Clarius VX 213 x 110 x 78mm
Weight
Clarius IS/Clarius VS 750g (1.6lbs)
Clarius IM/Clarius VM 1.05kg (2.3lbs)
Clarius IL/Clarius VL 1.35kg (3lbs)
Clarius IX/Clarius VX 1.75kg (3.9lbs)
Power Cable
3m (9ft). Other lengths available to order
Mount
Black power coated stainless steel wall mount.
Adjustable via M6 Allen Key (included)
PLUS
®
VS-CW / VS-CW-P
VM-CW
VL-CW
VX-CW
f: +44 (0) 1706 363 991
15W
26W
39W
52W
technology
®
DESCRIPTION
A complete range in Infra-Red and White-Light illuminators for CCTV, the
visible and Invisible range feature state of the art technology and installation
friendly design.
•
Energy efficient, low voltage operation for quick and easy installation
•
Dual Core
LED technology with advanced electronic control circuitry
®
deliver improved thermal management, long life and low cost of
ownership.
•
CleanLITE
self cleaning lens coating technology
®
•
Semi covert, covert and visible White-Light versions
•
Built in photo cell
•
Easy integration with day/night cameras with relay contacts indicating if
the built in photo cell has activated the illuminator
•
Remote telemetry input
•
Easy access to power and photo cell adjust
•
Pressure equalisation vent prevents thermal expansion and pressure
cycling
•
Interchangeable lens diffuse technology
RISK
GROUP 2
CAUTION
IR emitted
from this
product
INSTALLATION
Note:
•
Installation should be done by skilled personnel or under supervision of
such personnel
•
The illuminator is low voltage 12-32V DC or 24V AC.
•
Only to be installed in restricted Access Areas.
•
Terminal block not included. Installation may require advice from a
qualified person.
Optimum results are achieved by setting up at night and viewing the results
on a monitor.
1.
Attach the illuminator mount to pan/tilt unit, wall or camera housing.
Using stainless steel fixings suitable for the relevant application.
2.
Connect the lamp to a suitable (SELV) low voltage supply. Ensure that
the polarity is correct.
3.
Commission the mains supply, camera and monitoring equipment.
4.
Select the diffuser angle sheet required from the Clarius box (if required).
To position the required diffuser sheet, insert the tool included in the slot
at the bottom of the cover and prise upwards slowly. Repeat at opposite
end and carefully remove cover. Remove backing sheet from the two
adhesive discs and secure required diffuser in position. Finally firmly clip
the lens cover back into place.
5.
Adjust the pan angle of the illuminator to match the camera field of view.
6.
Adjust the vertical alignment by loosening the side bolts (one on each
side of the main body) to maximise the results.
7.
Tilt the lamp downwards until the rear part if the required field of view is
saturated with light, as viewed on the monitor.
8.
SLOWLY and GRADUALLY tilt the lamp upwards until the for part of the
required field of view is illuminated correctly on the monitor.