CLARIUS WL Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Освітлювальне обладнання CLARIUS WL. CLARIUS WL 2 сторінки. Infra red & white light led
Друкувати сторінкуInfra Red & White Light LED
Illuminators User Guide
IR
www.gjd.co.uk
Unit 2 Birch Business Park, Whittle Lane, Heywood, Lancashire, OL10 2SX
Specification
Electronics
High efficiency surface mount high
power LEDs with advanced current
limited integral control circuitry
Beam Angles
10°, 30º, 60º, 100x50º and 120º
Lens/Beam Pattern
The illuminator should be matched to
the scene and the camera lens focal
length
Wavelength
850nm,940nm and visible white light
Expected Life
10 years
Consumption
Clarius IS / Clarius VS
Clarius IM / Clarius VM
Clarius IL / Clarius VL
Clarius IX / Clarius VX
Input Voltage
12-32V DC or 24V AC +/-10%
Operating Temp
-50° to 60° (-58° to 140°F)
Environmental
IP67
Construction
Robust high quality aluminium extrusion
Front Window
Polycarbonate high transmittance
protection (vandal-proof) with
CleanLITE
Dimensions
Clarius IS / Clarius VS 68 x 110 x 78mm
Clarius IM / Clarius VM 114 x 110 x 78mm
Clarius IL / Clarius VL 161 x 110 x 78mm
Clarius IX / Clarius VX 213 x 110 x 78mm
Weight
Clarius IS / Clarius VS 750g (1.6lbs)
Clarius IM / Clarius VM 1.05kg (2.3lbs)
Clarius IL / Clarius VL 1.35kg (3lbs)
Clarius IL / Clarius VL 1.75kg (3.9lbs)
Power Cable
3m (9ft). Other lengths available to order
Mount
Black power coated stainless steel wall
mount. Adjustable via M6 Allen Key
(included)
WL
+44 (0) 1706 363 998
13W
26W
39W
52W
technology
®
Description
A complete range in infra-red and white light illuminators for
CCTV, the visible and Invisible range feature state of the art
technology and installation friendly design.
•
Energy efficient, low voltage operation for quick and
easy installation
•
Latest high efficiency surface mount LEDs with
advanced electronic control circuitry deliver improved
thermal management, long life and low cost of
ownership
Self cleaning lens Coating technology
•
CleanLITE
®
•
Semi-covert, covert and visible white light versions
•
Built in photocell
•
Easy integration with day/night cameras with relay
contacts indicating if the built in photocell has activated
the illuminator
•
Remote telemetry input
•
Easy access to power and photocell adjust
•
Pressure equalisation vent prevents thermal expansion
and pressure cycling
Installation
Note: The illuminator is low voltage 12-32V DC or 24V AC
Optimum results are achieved by setting up at night and viewing the
results on a monitor.
1.
Attached the illuminator mount to pan/tilt unit, wall or camera
housing
2.
Connect the lamp to a suitable low voltage supply. Ensure that the
polarity is correct
3.
Commission the mains supply, camera and monitoring equipment
4.
Adjust the pan angle of the illuminator to match the camera field
of view
5.
Adjust the vertical alignment by loosening the side bolts (one on
each side of the main body) to maximise the results
6.
Tilt the lamp downwards until the rear part if the required field of
view is saturated with light, as viewed on the monitor
7.
SLOWLY and GRADUALLY tilt the lamps upwards until the far part of
the required field of view is illuminated correctly on the monitor
+/- 10%.