CLARIUS EP PLUS VEP-CW60 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Прожектор CLARIUS EP PLUS VEP-CW60. CLARIUS EP PLUS VEP-CW60 6 сторінок. Led floodlight

1. SAFETY INSTRUCTIONS

Read this leaflet carefully before commencing to install the Clarius EP Plus unit and retain it for future

use. Installation can only be carried out by suitably qualified personnel.

Check the certification nameplate attached to the floodlight to ensure that the mains supply and

the ambient temperature present is suitable for the unit being installed.

If the Clarius EP Plus unit is to be installed in areas of high vibration, please consult with GJD.

The Clarius EP Plus unit housing is constructed from marine grade aluminium and polycarbonate. The

end user must ensure that these materials are suitable for the atmosphere the Clarius EP Plus unit will

be installed in.

The temperature rise on the incoming mains cable is 61oC above the ambient conditions. Select

suitable cable and ATEX/IECEx cable glands. For advice on suitable glands and cables, please con

tact GJD. All unused entries must have a suitable approved stopper plug fitted.

2. INSTALLATION

Clarius EP Plus

MOUNTING

To meet the requirements of certification a MINIMUM of two fixing points must be used. The fixing

points must be suitable for the conditions of use. The drawing below shows horizontal mount, single

unit. For multiple mounting brackets and other mounting options please contact GJD.

UNIT