eControls Comfort365 C365T21 Посібник користувача та інструкція з встановлення - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з встановлення для Терморегулятор eControls Comfort365 C365T21. eControls Comfort365 C365T21 13 сторінок.
Також для eControls Comfort365 C365T21: Посібник користувача (4 сторінок), Посібник користувача та інструкція з встановлення (13 сторінок)

Друкувати сторінку

USER OPTIONS

Factory Set Schedule
The thermostat comes pre-set with the
following energy-saving schedule for
weekdays (Mon-Fri) and weekends (Sat-Sun).
Using these settings can reduce your heating
and cooling expenses.
Monday - Friday
Time
Morn
6:00 AM
Day
8:00 AM
Even
6:00 PM
Nite
10:00 PM
Saturday & Sunday
Time
Morn
6:00 AM
Day
8:00 AM
Even
6:00 PM
Nite
10:00 PM
1
Change Factory Set Schedule
Touch the
Sleeping
key to display
Airflow %
Cool
Set To
SCHEDULE. If no
Schedule
Living
Living
COOL
Day
key is touched, the
Tu
SYSTEM
thermostat returns to
AM
AUTO
normal operation
MENU
MODE
FAN
after about 30
seconds.
SELECTING THE WEEKDAY OR
WEEKEND SCHEDULE
Touch the UP key to
select the weekday
schedule
Schedule
(MoTuWeThFr) or
Mo
Tu
We
ThFr
touch the DOWN
key to select the
MENU
NEXT
ENTER
weekend schedule
(SaSu). Touch NEXT.
SETTING THE MORNING
SCHEDULE START TIME.
Touch the
UP/DOWN keys to
change the Morning
Schedule
Start Time. Touch
Morn
Mo
Tu
We
ThFr
NEXT.
AM
MENU
NEXT
ENTER
SETTING THE MORNING
HEATING TEMPERATURE.
Touch the
Heat
UP/DOWN keys to
Set To
change the Morning
Schedule
Morn
Heating Setpoint.
Mo
Tu
We
ThFr
Touch NEXT.
AM
MENU
NEXT
ENTER
SETTING THE MORNING
COOLING TEMPERATURE.
Touch the
UP/DOWN keys to
Cool
Set To
change Morning
Schedule
Morn
Cooling Setpoint.
Mo
Tu
We
ThFr
Touch NEXT.
AM
MENU
NEXT
ENTER
Continue setting the start times, heating setpoints,
cooling setpoints for the Day, Evening and Night
schedules.
Touch ENTER to save the schedule.
HOMEOWNER SECTION
2
Automatic Airflow Control On or Off
Homeowners with an unusual schedule, home
office, etc. may want to use this option.
With Automatic Airflow Control Off, the
Nighttime Airflow Control option is still
enabled. If desired, the homeowner can turn
Heat Cool
the Nighttime Airflow Control option off using
70
75
User Options.
62
83
This option is not displayed if the installer
70
75
turned off Option 16 in the installer options.
62
78
Touch the MENU key until the following
Heat Cool
thermostat screen is displayed.
70
75
62
83
Airflow %
70
75
62
78
MENU
NEXT
MENU
Airflow %
MENU
NEXT
Airflow % will blink indicating that Airflow is in
manual control.
Touch the
MENU
option or touch the ENTER key to save the options
and return to normal thermostat operation.
If Nighttime Airflow Control is On, at the
morning start time when Nighttime Airflow
Control ends, the airflow % will change to
100%. This prompts the homeowner to
evaluate the airflow needs for that day.
3
Nighttime Airflow Control On or Off
This option is not displayed if Airflow Control
has been turned off by the installer using the
Installer Options.
If bedrooms are located downstairs, consider
turning the Nighttime Airflow Control OFF.
NIGHTTIME AIRFLOW CONTROL defaults to On
and is used to save energy. The thermostat uses
the temperature sensor in the sleeping area for
controlling heating and cooling calls. The airflow
is increased to 130% to the sleeping area and the
airflow is reduced to 70% to the unused living
area. The thermostat displays the sleeping area
temperature.
Upstairs
Airflow %
Night
MENU
NEXT
Upstairs
Airflow %
Night
MENU
NEXT
Thermostat defaults
to Automatic Airflow
Control On and
automatically directs
more airflow to where
it's needed.
ENTER
To turn Automatic
Airflow Control OFF,
touch the DOWN
key. The user must
set the airflow when
airflow control is off.
ENTER
key to save and go to next
Touch the MENU key
to display
NIGHTTIME
AIRFLOW indicated
by nAF On or Off.
ENTER
Touch the UP key to
turn the option ON.
Touch the DOWN
key to turn the
option OFF.
ENTER
Page 11 of 16
3
Nighttime Airflow Control (Cont.)
Touch the MENU key to save and go to next
option or touch the ENTER key to save the options.
Default start time for Nighttime Airflow is
10:00pm but can be changed using User
Option 1 to change the Night Schedule Start
Time.
Default airflow level upstairs is 130%. If a
different airflow level is desired, use User
Option 4 to change the airflow level in heating
and User Option 5 to change the airflow level
in cooling.
4
Set the Nighttime Airflow in Heating
This option is not displayed if Airflow Control
has been turned off.
This option is used to change the default
nighttime airflow in heating of 130% to a user
desired airflow level, not to exceed installer limits.
Sleeping
Heat
Airflow %
Night
MENU
NEXT
ENTER
Touch the
MENU
key to display NIGHTTIME,
UPSTAIRS AIRFLOW IN HEATING indicated by
nAF Heat.
Use the UP/DOWN keys to adjust the airflow.
Touch the MENU key to save and go to next
option or touch the ENTER key to save the option.
5
Set the Nighttime Airflow in Cooling
This option is not displayed if Airflow Control
has been turned off.
This option is used to change the default
nighttime airflow in cooling of 130% to a user
desired airflow level, not to exceed installer limits.
Sleeping
Airflow %
Cool
Night
MENU
NEXT
ENTER
Touch the MENU key to display NIGHTTIME,
UPSTAIRS AIRFLOW IN COOLING indicated by
nAF Cool.
Use the UP/DOWN keys to adjust the airflow.
Touch the MENU key to save and go to next
option or touch the ENTER key to save the option.