eControls ECOM E2046012 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Кабелі та роз'єми eControls ECOM E2046012. eControls ECOM E2046012 12 сторінок. Ecom driver installation
Друкувати сторінку
- 1. Table of Contents
- 1. 1 Introduction
- 2. 2 Ecom Tm Installation Procedure
- 2. Running the Setup Program
- 2. Connecting the ECOM
- 2. Verifying ECOM™ Installation
- 3. 3 Troubleshooting Ecom Tm Issues
- 3. General Troubleshooting
- 3. Windows 10 Driver Installation Issues
- 3. Windows 7 Driver Installation Issues
00: CUSTOMER
(see detail on Title Page)
1
INTRODUCTION
Thank you for purchasing an ECOM
TM
The ECOM
cable is a USB 2.0 device that allows Controller Area Network (CAN) traffic to be
transmitted and received using a computer or laptop. It was originally designed by EControls to
provide a CAN interface for our OEM customers to communicate with our Engine Control Modules
(ECMs), but it is now offered for use in custom software development.
TM
ECOM
is available in multiple variations which are designated numbered as
E20460
XX
= an application-specific part number modifier..
The following ECOM
TM
ECOM
Part
Number
E2046002
E2046003
E2046012
E2046013
To start using any ECOM
to the steps contained in the following sections of this document for software driver installation
instructions.
EControls LLC. Confidential and / or proprietary information. Do not copy or distribute without prior written approval.
ECOM
Installation Manual
TM
cable from EControls.
TM
= the ECOM
family part number root, and
TM
variations are designated by part number and logo color as follows:
Logo
Color
Green
GCP / 4G ECOM™ device (Standard)
Blue
GCP / 4G ECOM™ device (CANCapture™-Compatible)
Green
GCP / 4G ECOM™ v2 device (Standard)
Blue
GCP / 4G ECOM™ v2 device (CANCapture™-Compatible)
TM
variation you will first need to install the software driver. Please refer
TM
Driver
Application
Doc. No. ER000060_00 Rev E1-
Page 4 of 12
E20460XX
, where