Yamaha Arius YDP-S54 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Arius YDP-S54. Yamaha Arius YDP-S54 15 сторінок. Midi reference
Також для Yamaha Arius YDP-S54: Посібник користувача (48 сторінок)
Друкувати сторінку
29
1
NOT USED
2A
1
NOT USED
2B
1
NOT USED
2C
1
NOT USED
2D
1
NOT USED
TOTAL SIZE
0E
n: Drum Setup Number (0-1)
rr: note number (0D-5B)
In the following cases, the instrument will initialize all Drum Setups.
• XG SYSTEM ON received
• GM SYSTEM ON received
• GM LEVEL2 SYSTEM ON received
• GS RESET received
• DRUM SETUP RESET received (only when in XG mode)
When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized.
If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned.
System Exclusive Messages (1)
Application Range
MIDI, Internal Sequencer
Not Received when Receive Parameter SysEx is set to off.
Not transmitted when Transmit Parameter SysEx is set to off.
System Exclusive Messages (Universal Non-Real Time Messages)
MIDI Event
GM1 System On
F0 7E XN 09 01 F7
11110000
F0 = Exclusive status
01111110
7E = Universal Non-Real Time
0xxxnnnn
XN = When N is received N=0-F, whichever is received. X=ignored
00001001
09 = Sub-ID #1 = General MIDI Message
00000001
01 = Sub-ID #2 = General MIDI On
11110111
F7 = End of Exclusive
General MIDI System
F0 7E XN 09 02 F7
11110000
Off
F0 = Exclusive status
01111110
7E = Universal Non-Real Time
0xxxnnnn
XN = When N is received N=0-F, whichever is received. X=ignored
00001001
09 = Sub-ID #1 = General MIDI Message
00000010
02 = Sub-ID #2 = General MIDI Off
11110111
F7 = End of Exclusive
*1 Changed to XG, and output.
System Exclusive Messages (2)
Application Range
MIDI, Internal Sequencer
Not Received when Receive Parameter SysEx is set to off.
Not transmitted when Transmit Parameter SysEx is set to off.
System Exclusive Messages (XG)
MIDI Event
XG Parameter Change
F0 43 1n 4C hh mm ll dd ... F7
11110000
F0 = Exclusive status
01000011
43 = YAMAHA ID
0001nnnn
1n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100
4C = Model ID
0hhhhhhh
hh = Address High
0mmmmmmm
mm= Address Mid
0lllllll
ll
= Address Low
0ddddddd
dd = Data
...
...
11110111
F7 = End of Exclusive
XG Bulk Dump
F0 43 0n 4C aa bb hh mm ll dd ... dd cc F7
11110000
F0 = Exclusive status
01000011
43 = YAMAHA ID
0000nnnn
0n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100
4C = Model ID
0aaaaaaa
aa = Byte Count MSB
0bbbbbbb
bb = Byte Count LSB
0hhhhhhh
hh = Address High
0mmmmmmm
mm= Address Mid
0lllllll
ll
= Address Low
0ddddddd
dd = Data
:
0ddddddd
dd = Data
0ccccccc
cc = Checksum
11110111
F7 = End of Exclusive
XG Parameter
F0 43 3n 4C hh mm ll F7
Request
11110000
F0 = Exclusive status
01000011
43 = YAMAHA ID
0011nnnn
3n = Device Number n=always 0 (when transmit), n=0-F (when receive)
01001100
4C = Model ID
0hhhhhhh
hh = Address High
0mmmmmmm
mm= Address Mid
0lllllll
ll
= Address Low
11110111
F7 = End of Exclusive
Data Format
Data Format
:
–
–
–
–
–
–
–
–
–
–
MIDI Reception
MIDI
Main
Formats
Song
Layer
Left
[GM1] [GM2]
[GM1] [GM2]
MIDI Reception
MIDI Transmission
Main
Song
Layer
Panel
Left
*Refer to
*Refer to Parameter Change
Parameter Change
Table.
*Refer to
*Refer to Parameter Change
Parameter Change
Table.
*Refer to
Parameter Change
Table.
(However, the
request for
address
"0A nn 4v" will be
ignored.)
YDP-164, YDP-144, YDP-S54 MIDI Reference
MIDI Data Format
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MIDI Transmission
Panel
Song
(*1)
(*1)
Song
Table.
Table.
12