Yamaha AW2816 Навчальний посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Навчальний посібник для Музичний інструмент Yamaha AW2816. Yamaha AW2816 31 сторінка. Professional audio workstation, recording101
Також для Yamaha AW2816: Посібник з експлуатації (2 сторінок), Посібник з оновлення (2 сторінок), Посібник (32 сторінок)
Друкувати сторінку
Restoring the demo song
The following chapter explains the mixdown proce-
dure using the demo song included with the AW2816.
Thus, we will begin by explaining how to load the
demo song from the included CD-ROM into the
AW2816's hard disk.
In this tutorial, we will assume that an ATAPI-con-
nected CD-RW drive has already been installed in the
AW2816. However, it is also possible to use an exter-
nal SCSI CD-RW drive. For details on how to install a
CD-RW drive, refer to the AW2816's "Owner's Man-
ual."
Restoring to the hard disk
1
Press the [FILE] key.
2
Press the [F2] key to access the Restore
page.
3
Make sure that in the SOURCE area, the
DRIVE parameter is set to ATAPI.
(If you want to use an external SCSI CD-RW
drive, move the cursor to the SOURCE area, and
turn the [DATA/JOG] dial to select the appropri-
ate SCSI ID number, and then press the [ENTER]
key.)
4
Hold down the [SHIFT] key and press the
[F2] key (CD UNLOAD) to open the CD
tray.
Place the included demo CD-ROM with the
label facing upward on the tray. Then hold down
the [SHIFT] key and press the [F1] key (CD
LOAD) to close the tray and load the CD.
5
The demo song "Can you feel it?" will
appear in the on-screen list.
Move the cursor to the RESTORE SONG area and
press the [ENTER] key. The RESTORE SONG but-
ton will change from DISABLE to ENABLE.
6
Move the cursor to the EXECUTE button in
the screen, and press the [ENTER] key. A
message of "ARE YOU SURE" will ask you
to confirm, so move the cursor to "OK"
and press the [ENTER] key to begin the
Restore operation.
8
Restoring the demo song
7
When the display indicates "COMPLETE,"
the Restore operation has been completed.
The Restore operation will take approximately
ten minutes. Once you have executed Restore, it
is not possible to cancel the operation.
Loading the demo song from
hard disk
1
Press the [SONG] key. (If the Song List
page does not appear, press the [F1] key.)
2
Use the [DATA/JOG] dial to select "Can you
feel it?"
3
Move the cursor to the LOAD button in the
screen, and press the [ENTER] key. A mes-
sage of "Will Save Current Song. ARE YOU
SURE?" will appear, so move the cursor to
"YES" or "NO," and press the [ENTER] key
to begin loading the data.
4
When the progress indicator disappears,
the demo song has finished loading.
If you want to hear the pre-mixed version of the
demo song before you mix it yourself:
Press the [PLAY] key. The demo song will be
loaded with automix turned on, and will be
played back according to this mix.