Yamaha Clavinova CLP-157 Посібник користувача - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Clavinova CLP-157. Yamaha Clavinova CLP-157 39 сторінок. Yamaha clavinova owner's manual

Друкувати сторінку

Stop Recording

RECORDER

PLAY

REC

Changing the Initial

Settings

Erasing a Single Track

RECORDER

PLAY

REC

Fast Forward Playback

RECORDER

MIDI/

TRANSPOSE

PLAY

REC

Press either the RECORDER [REC] or [PLAY] button to stop recording. The

indicator of the recorded track will glow green to indicate that it now contains data.

The initial voice (including dual mode and dual balance setting), damper pedal, soft

pedal, tempo, reverb type, reverb depth, effect, and brilliance settings made in step 3 of

the recording procedure are actually recorded by the CLP-157. These initial settings

can be changed after the recording is finished by pressing the [REC] button to engage

the record ready mode, pressing the appropriate track button, making the required

changes, and then pressing the [REC] button again to exit from the record ready mode

and register the changes. If you do this, be careful not to press the [PLAY] button or a

key on the keyboard, either of which will start recording and erase all previous re-

corded data on the selected track. If you start this procedure but decide to cancel, sim-

ply select a different track then press the [REC] button a second time.

All data can be erased from either of the recorder's tracks by engaging the record

mode, selecting the track you want to erase, and then pressing the [PLAY] button twice

without recording any data.

To play back what you've recorded, first make sure that the green track indicators of

the tracks you want to play are lit. If not, press the corresponding track button(s) so that

they are lit. Then press the RECORDER [PLAY] button. Playback starts from the

beginning of the recorded data, and will stop automatically at the end of the recorded

data. The current measure number will appear on the TEMPO display during playback.

You can also stop playback at any time by pressing the [PLAY] button. To mute a

track so that it doesn't play back, press the corresponding track button so that its indi-

cator goes out (press again to turn the track back on).

• All recorder data will be retained in memory for about one week after the power is

NOTE

turned off. If you want to keep your recorded data for longer periods, turn the power on

briefly at least once a week. It is also possible to store it to an external MIDI storage

device such as the Yamaha DOU-10 Disk Orchestra Unit by using the Bulk Dump

function described on page 22.

• The track indicators will not light automatically when the power is turned on even if the

recorder contains data. It is therefore necessary to press the track buttons so that the

corresponding green indicators light before starting RECORDER playback. It is also a

good idea to press the track buttons to check if the tracks contain data before record-

ing. If the green indicator lights when the corresponding track button is pressed, that

track contains data which will be erased and replaced by the newly-recorded data.

• If the metronome is being used during playback, the metronome will stop when play-

back is stopped.

• The playback data is not transmitted via the MIDI OUT connector.

When you want to locate a specific point in a recording you can quickly move for-

ward through the recording while monitoring the sound by pressing the [REC] button

while holding the [MIDI/TRANSPOSE] button.