Yamaha Clavinova CLP-725 Посібник користувача - Сторінка 26
Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Clavinova CLP-725. Yamaha Clavinova CLP-725 40 сторінок.
Друкувати сторінку
Recording Your Performance
Not only can you simply record your keyboard performance (Quick Recording), but you can record two
parts (left-hand and right-hand) separately. The recorded data is called a User Song, and can be saved to a
computer as a Standard MIDI file (SMF; page 29).
Recording Your Performance
1.
Select the desired Voice and other parameters, such as beat
(time signature), for recording.
For instructions on selecting a Voice, refer to page 18. If necessary, set other
parameters, such as beat (time signature) and effects, in this step.
2.
Engage the Record Ready mode.
Quick Recording
Press [REC] to engage the Record Ready mode. Your keyboard performance will be
automatically recorded to the right-hand part. Note that the already-recorded data
of the right- and left-hand parts will be erased by Quick Recording.
Recording to individual parts
While holding down [REC], press [+R] or [–L] to engage the Record Ready mode
for the Part you want to record.
To record the right-hand Part ([+R])
If data has already been recorded to the other Part, the data in this Part will be
played back while recording.
To turn the Part off or on, press the appropriate part button ([+R] or [-L]) while
holding down [PLAY].
To exit from Record Ready mode:
Simply press [REC].
3.
Play the keyboard or press [PLAY] to start recording.
The [REC] lamp lights up while the Recording Part lamp flashes at the current
tempo.
4.
Press either [REC] or [PLAY] to stop recording.
The [REC], [PLAY], [+R] and [–L] lamps flash, indicating that the recorded data is
being stored. After the Save operation is completed, the lamps will turn off,
indicating that the Record operation has been completed.
5.
To hear the recorded Song, press [PLAY] to start playback.
Press [PLAY] again to stop playback.
To record to the other part
Repeat the steps above. In step 2, follow the instructions of "Recording individual
parts."
26
CLP-725 Owner's Manual
To record the left-hand Part ([–L])
NOTE
The Recording function of this
instrument will record your
keyboard performance as
MIDI data. If you want to
record audio data, you can
connect a computer to the
instrument for that purpose.
Refer to page 28 for details.
NOTE
You can use the Metronome
while recording; however, the
Metronome sound will not be
recorded.
NOTE
If the keyboard is in the Duo
mode (page 23), the data will
be recorded to each Part. The
Part for recording cannot be
specified.
NOTICE
Note that recording your
performance to a part
containing data will replace
already-recorded data with
the new data.
NOTE
If the data capacity of the
instrument approaches full
when you engage Record
Ready mode, the [REC] and
[PLAY] lamps flash quickly for
about three seconds.
NOTICE
Never turn off the power
while the recorded data is
being stored (while the
lamps are flashing).
Otherwise, all recorded data
will be lost.
Recording Capacity
This instrument can record up
to 250 KB (approximately
11,000 notes).