Yamaha disklavier DS4M4 PRO Посібник з технічного обслуговування - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник з технічного обслуговування для Музичний інструмент Yamaha disklavier DS4M4 PRO. Yamaha disklavier DS4M4 PRO 36 сторінок.
Друкувати сторінку
8-1. Updating the Disklavier
First you need to update the Disklavier (I/O Center and Central Signal Processor),
and then, update Pocket Controller and Tablet Controller.
Updating the I/O Center and Central
Signal Processor
1) Turn the Disklavier on. ( pg. 4
Turning the Disklavier On in Quick
Guide)
2) Load the update CD and install floppy
disk into their respective drives on the
Media Center. (pg. 1 and 20 in
Advanced Operating Manual)
3) Hold down
on the Media
Center until the button starts flashing.
The Disklavier shuts down.
4) Wait for approximately 10 seconds or
more, and then press
Update of the I/O Center starts. During update,
thebuttons on the Media Center light in turn.
5) Wait until the CD tray opens, and
then remove the CD and the floppy disk.
It takes approximately 10 minutes before the CD tray
open.
6) Press
on the Media Center to
close the CD tray. Update of the Central Signal
Processor starts. During update, the buttons on the
Media Center light in turn.
7) Confirm that
lights blue.
Update process is completed.
Updating the Pocket Controller
1) Confirm that the Disklavier is turned
on, and then press
2) Tap on
([PRC-100 Menu] icon) on the Task Bar.
3) Tap on
([Interface Updater] icon).
4) Tap on the check boxes of all
applications to check all the boxes.
5) Tap on
(Install box).
Update of the Pocket Controller starts, and the
message [Updating] appears.
After a few minutes, the following message
appears.
on the Media Center.
.
MHB23 MKIV/PRO DIOV1.05, SCV.1.01 PAGE.25
Making an Install Floppy Disk
1, Tap on
in the [Main] screen,
and then on
2, Load a formatted floppy disk (2HD) to
the drive.
3, Tap on
4, Tap on the check boxes of all
applications to check all the boxes.
The Disklavier will start making a backup floppy disk.
.
.