Yamaha DM 2000 Version 2 Посібник користувача - Сторінка 28

Chapter 3—Selected Channel Window

Bus Out Routing/Pan/Level section

This section contains the controls for the currently selected Bus Out's routing, pan, and level

functions. The TO STEREO button turns on and off the Bus to Stereo routing, and the

rotary controls are used to set the Bus to Stereo level and Pan position. The SOLO button is

used to solo the Bus Out, the ON button to turn the Bus Out on and off, and the Channel

Fader to set the Bus Out level. The AUTO button is not used in Version 1.0 of Studio Man-

ager for DM2000.

COMPRESSOR section

This section contains the controls and display graph for the currently selected Bus Out's

Compressor and is identical to the Compressor section of the Input Channels. See page 23.

INSERT section

This section contains the parameters for the currently selected Bus Out's Insert. The

INSERT button turns the Insert on and off. The OUT and IN parameters are used to select

the channel's Insert Out and Insert In, and the POSITION parameter is used to specify the

Insert's position in the channel's signal path.

FADER GROUP/MUTE GROUP section

This section contains the buttons for assigning the currently selected Bus Out to the Fader

Groups and Mute Groups. Click the Heart Mark to pair the channel with its adjacent chan-

nel.

Aux Sends

The Selected Channel window for the Aux Sends is shown below.

CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that

appears, or by clicking the left and right Channel Select buttons. This section also displays

Studio Manager—Owner's Manual