DirectConnect 43136 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач DirectConnect 43136. DirectConnect 43136 10 сторінок. 16-port gigabit ethernet unmanaged switch
Друкувати сторінку
3. Installing and Connecting the Switch
This part describes how to install your Switch and make connections to it. Please read the following
topics and perform the procedures in the order being presented.
3.1.
Installation Method
Follow the below guide to install the switch:
Please install the switch in a fairy cool and dry place. See the Technical Specification for the
acceptable temperature and humidity operation ranges.
Install the switch on a sturdy, level surface that can support its weight.
Connect the power cord to the switch and the power outlet. The distance is less than 150cm.
Leave at least 10cm (about 4 inches) of space at the front and rear of the switch for ventilation.
3.2.
Installation
3.2.1. Desktop Installation
When installing the Switch on a desktop, please attach the cushioning rubber feet provided on the
bottom at each corner of the Switch to help reduce external vibration. Allow adequate space for
ventilation between the device and the objects around it.
Note:
Please avoid any heavy objects placed on the Switch.
3.2.2. Rack-Mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed in a wiring
closet with other equipment. To install the Switch, please follow these steps:
A. Attach the mounting brackets on the Switch's side panels (one on each side) and secure them with
the screws provided.
16-Port Gigabit Ethernet Unmanaged Switch
4