Yamaha Silent Guitar SLG-100N Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Silent Guitar SLG-100N. Yamaha Silent Guitar SLG-100N 16 сторінок. Yamaha guitar user manual
Також для Yamaha Silent Guitar SLG-100N: Технічні характеристики (2 сторінок), Брошура (40 сторінок), Посібник з експлуатації (23 сторінок), Посібник з експлуатації (22 сторінок), Посібник користувача (японською мовою) (17 сторінок)

As the strings get old, sound quality will gradually decrease, and it will become

difficult to tune the instrument. Change the strings as soon as you think they are

getting old.

Make sure you purchase a set of nylon guitar strings. The Silent Guitar uses a string

length of 650mm (25-9/16 inch).

• The end of the strings are sharp and can cut fingers. Use caution when changing strings.

• When changing or adjusting strings, do not put your face close to the instrument. The string may

suddenly break resulting in eye or other unexpected injuries.

Thread the string through the corresponding string hole on the bridge, then tie the string as shown in the

illustration below.

After tying the knot, pull both ends of the string to make the knot firm on the bridge.

neck side

bridge

Next, tie the strings to the pegs.

Hold the guitar so the head is facing you and wind the strings onto the pegs as shown in the illustration

below.

• Winding the 1

, 2

Make the first wind to the left of the

hole, and the remaining winds to the

right.

• Winding the 4

, 5

Make the first wind to the right of the

hole, and the remaining winds to the

left.

After all six strings are strung, go on to the "Tuning" (page 8) procedure and tune the guitar properly.

Changing Strings

* If the string slips (1

strings A

and 3

strings B

and 6

Make sure the last knot is

positioned over the edge of

the bridge.

, 2

, 3

strings) tie one more knot.