Yamaha WX5 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha WX5. Yamaha WX5 44 сторінки. Yamaha wind midi controller owner's manual

Друкувати сторінку

Octave Shift

The octave keys can be used to shift the pitch up or

down by one, two, or three octaves while playing, as fol-

lows:

[Up 2] Octave Key

[Up 1] + [Up 2] Octave Keys

[Up 1] Octave Key

[Down 1] Octave Key

[Down 1] + [Down 2] Octave Keys

[Down 2] Octave Key

Pitch Bend Wheel

The WX5 pitch bend wheel makes it possible to pro-

duce smooth upward and downward bends over a greater

range than is possible via lip control. Rolling the wheel

upward (towards the mouthpiece end of the instrument)

produces an upward pitch bend, and rolling the wheel

downward produces a downward pitch bend.

Bend Up

Bend Down

• Using the neck strap and thumb hook provides maxi-

mum instrument stability, making it easier to produce

accurate pitch bends using the pitch bend wheel.

• Set the required pitch bend range via the correspond-

ing parameter on your tone generator.

• Don't turn the WX5 power on while moving the pitch

bend wheel. Doing so will cause the center wheel po-

sition to shift, thereby causing the instrument to play

out of tune.

• Be careful not to accidentally press the Key Hold but-

ton while operating the Pitch Bend Wheel.

3 octaves up

2 octaves up

1 octave up

1 octave down

2 octaves down

3 octaves down

Basic Playing Techniques

Changing the Pitch Bend Wheel Function

The function of the pitch bend in the upward and down-

ward directions (i.e. the MIDI data it generates when

rolled upward or downward) can be changed by using

the Setup and Octave buttons while the pitch bend wheel

is rolled all the way up or down, as listed below:

Pitch bend wheel + Setup Button + Octave Key

Pitch Bend Wheel + Setup Button + [Up 2] Octave Key

Pitch bend up data

Pitch bend down data

Pitch Bend Wheel + Setup Button + [Up 1] Octave Key

Modulation wheel data

Pitch bend down data

Pitch Bend Wheel + Setup Button + [Down 1] Octave Key

Control change #16 (0 ... 127) data

Control change #17 (0 ... 127) data

Pitch Bend Wheel + Setup Button + [Down 2] Octave Key

Brightness up (control change #74) data

Brightness down (control change #74) data

• When brightness control is selected, the wheel trans-

mits control change #74 value 64 at its center posi-

tion, value 127 in the maximum upward position, and

value 0 in the maximum downward position.

• According to GM (General MIDI) specifications, con-

trol change numbers #16 and #17 are non-reserved

and available for general use. If your tone generator

allows parameters to be assigned to MIDI control num-

bers, you can use the pitch bend wheel to control any

available parameter. With the VL70-m, for example,

you might want to assign the scream, growl, or other

expressive parameters to control change numbers #16

and #17, so that they can be controlled via the WX5

pitch control wheel.

Fing

Win

LIP

Fast

LIP

Hi ct

LIP

Whl

LIP+

nrm

fix

B/C EXP

VOL

nrm hrd

tht

loos

off

nrm wide

off

P/B M/W

gen

off

filt

Octave key

[Up 2], [Up 1],

[Down 1], [Down 2]