Yamaha YCL-CX Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YCL-CX. Yamaha YCL-CX 18 сторінок. Clarinet

Assembly

Before assembling the instrument, please observe the following.

Th e clarinet is made of natural wood and precision metal parts. When holding and assembling

the instrument, take care not to place any excessive force on the keys.

Also, if you have diffi culty attaching the joints together when assembling the instrument, apply a

thin coat of cork grease to the joints and try to put the joints together again. When applying cork

grease, be careful not to apply too much. If the joints still do not go together smoothly, apply a

thin coat of cork grease to the receiver side as well.

 Assembly

B b /A Clarinet

Attach the barrel to the upper joint and the

bell to the lower joint.

To link the upper and lower joint bridge keys

together, hold the upper joint in your left hand

as shown in the illustration and press the upper

keys to raise the bridge key.

Hold the lower joint in your right hand and

check the position of the bridge key. Slide the

lower joint onto the upper joint by rotating

the lower joint.

bridge key

* Make sure the upper and lower bridge keys do not

come into contact with each other.

After connecting the upper and lower joints

together, attach the mouthpiece.

E b Clarinet

Attach the barrel and bell to the main body.

Attach the mouthpiece to the barrel.