Yamaha YM-4600A Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YM-4600A. Yamaha YM-4600A 16 сторінок. Concert marimbas
Також для Yamaha YM-4600A: Посібник користувача (14 сторінок), Посібник користувача (12 сторінок)

Друкувати сторінку

1-2. Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the

reinforcement stays and tighten the fixing bolt securely.

Reinforcement stay

(Large end)

1-3. Install the reinforcement stay to the large end leg.

Insert the "E" marked end of the reinforcement stay (with its slant shaft facing down) into the joint

(marked with "E") on the large end leg until it stops and tighten the fixing bolt securely.

In the same way, install the reinforcement stay to the small end leg. (There is no marking on the

small end joint.)

Leg (Large end)

1-4. After making sure that both legs are perpendicular to the floor, fit the end of each slant shaft to

the wing nut located in the lower part of each leg and tighten it securely.

* Make sure that the slant shaft is securely fitted.

Fixing bolt

Leg (Large end)

Wing nut

Screw hole

Reinforcement stay

(Small end)

Reinforcement stay (Large end)

Slant shaft

ASSEMBLY