Yamaha YPT-260 Посібник користувача - Сторінка 29

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YPT-260. Yamaha YPT-260 48 сторінок. Digital keyboard
Також для Yamaha YPT-260: Посібник користувача (28 сторінок), Посібник користувача (28 сторінок), Посібник користувача (28 сторінок), Посібник користувача (50 сторінок), Посібник користувача (28 сторінок), Посібник користувача (28 сторінок)

Друкувати сторінку

Recording Your Performance (Phrase Recording)

You can record your performance as a User Song (Song number 113), which can then be

played back on the instrument. The recorded User Song can be played back in the same

way as the preset Songs.

NOTE

• A total of approximately 300 notes can be recorded to the User Song.

Select the desired Voice.

Press the [PHRASE REC] button to

enable the Record mode.

001

To exit from the Record mode, press the

[PHRASE REC] button again. (The display stops

flashing.)

NOTICE

• If the User Song is recorded, the data will be recorded

over and erased (you will record over and erase previ-

ous data in "User Song").

Play the keyboard to start recording.

NOTICE

• Never attempt to turn the power off or connect or dis-

connect the AC adaptor. Doing so can result in a loss

of data.

NOTE

• When recording capacity becomes full during recording,

a "Mem Full" message appears on the display, recording

is stopped, and the Song select display is shown.

• If you press the [START/STOP] button, even if you don't

play the keyboard, recording starts.

Limitations while recording:

• The following settings/operations cannot be

recorded: Reverb Level, Style, metronome click,

Transpose, Tuning.

• The following settings and buttons are not avail-

able, or if operated, the new settings cannot be

recorded:

Split Point, Reverb Type, Chorus Type, [FUNC-

TION] button, [PORTABLE GRAND] button.

UserSong

Flashes

Press the [START/STOP] button to stop

recording.

To play back the recorded Song, press

the [START/STOP] button.

NOTE

• If you make a mistake or want to erase an existing Song,

you can delete the User Song. To do this, enable the

Record mode in step 2, and then press the [START/

STOP] button twice in succession (without playing the

keyboard).

PSR-E263 YPT-260 Owner's Manual