Yamaha YSH-301 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YSH-301. Yamaha YSH-301 31 сторінка. Alto (tenor) horn/baritone/ euphonium/tuba/sousaphone

Друкувати сторінку

Before You Play

 Assembling the Leadpipe

(Sousaphone only)

Th e sousaphone uses a multi-piece leadpipe. Th is

leadpipe in combination with a bit allows the

player to adjust the mouthpiece to a comfortable

position to best fi t individual needs.

Apply some slide grease to the middle section

of the leadpipe and then insert it into the lead-

pipe receiver. Next, tighten the screw on the

receiver to secure the middle pipe in place.

Bit

Receiver Screw

Mouthpiece

Leadpipe receiver

* If the bit is left on the leadpipe, it may become

stuck in place. After playing, make sure that the

bit is removed from the leadpipe and remove

moisture from the bit.

* Th e YSH-411 is supplied with two diff erent bits.

Both can be connected together if necessary.

Leadpipe

Middle pipe

 Assembling the Marching Tuba

(Marching series only)

Th e leadpipe on one of the marching series tuba

models can be switched to convert the instrument

between marching use and regular concert use. (An

"M" at the end of the product number indicates a

marching series tuba.)

Loosen screws A and B to remove the regular

concert leadpipe, then attach the marching

leadpipe and tighten screws A and B.

Concert leadpipe

* Th e marching type leadpipe may become stuck or

diffi cult to remove if left in the tuba. Please use

caution.

Insert the square support on the backside of

the instrument and use screw E to adjust the

leadpipe angle, then tighten screws C and D to

secure it.

Backside

Square support

Marching

leadpipe