Yamaha YT-280D Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YT-280D. Yamaha YT-280D 17 сторінок. Vibraphone, metallophone
Також для Yamaha YT-280D: Посібник користувача (14 сторінок), Посібник користувача (18 сторінок), Посібник користувача (16 сторінок)

Yamaha YT-280D Посібник користувача
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you
or others, or damage to the instrument or other property. These precautions include, but are not
limited to, the following:
Handling
• Never place any objects on the instrument. Doing so can
damage the tone bars or frame.
• Never use the mallets for anything other than playing the
instrument. Doing so can result in injury or accidents. Do not
allow children to use the mallets in any way that may pose a
danger to themselves or others.
• Never strike the tone bars with glockenspiel mallets or any
other solid objects. Doing so can dent or scratch the tone
bars or alter their pitch.
• Treating the controller or driver roughly can damage the
internal circuit board, etc. Please use caution.
• Tone bars can be cleaned using a soft, dry cloth or silicon
cloth. Stains that are still visible may be wiped using off with
a small amount of ethyl alcohol applied to a soft cloth. Never
use thinner, benzine, or a wet cloth.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.
NOTICE
• After final adjustment of the legs the fixing screws must be
tightened securely to prevent loosening. Looseness may
cause the instrument to shift during performance and can
also cause noise and other problems. Retighten the screws
from time to time.
• Do not use the instrument in locations with poor ventilation.
• Parts such as switches, volume control, jacks, are called
consumable parts and their function will deteriorate over
time. The level of deterioration will vary depending upon
the conditions under which the instrument is used however
it cannot be avoided. When replacing consumable parts,
please consult with the dealer from whom you purchased
the instrument.
Power/AC adapter
• Never pull on the cord when disconnecting the AC adapter
from the outlet. Always hold the AC adapter when connecting
or disconnecting the power.
• Always disconnect the AC adapter from the outlet when the
instrument is not used for any extended period of time.
• Always use an AC adapter that meets YAMAHA specifica-
tions. The use of any other AC adapter may cause damage.

Installation Location

• Always unplug the power cord before moving the instrument.
The cord may become damaged or you may trip and fall.
• When moving the instrument, move it gently avoiding shocks
and impacts. The instrument is sensitive to shocks and may
become damaged.
• When moving the instrument, move it gently avoiding
shocks and impacts. Also make sure that the power adapter
is disconnected and the caster stoppers are unlocked. Lift
the instrument slightly whenever moving it over surfaces
that are not smooth or flat.
• If the instrument is often moved, bolts, parts, etc., may
become loose. After moving the instrument, check and
make sure all bolts, parts, etc., are firmly fastened. Firmly
tighten all loose items.
13