Yamaha YV-3700 Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YV-3700. Yamaha YV-3700 28 сторінок. Concert vibes
Також для Yamaha YV-3700: Посібник користувача (28 сторінок)

Друкувати сторінку

Please read the following instructions carefully before using your vibes.

Installation Location

Use or storage in the following locations may cause

damage, even when packaged.

• In direct sunlight, such as near a window, or in a

closed vehicle in daytime.

• Near heating devices or in other locations subject

to excessive heat.

• In excessively cold environment.

• In places with excessive humidity or dust.

• Locations subject to vibrations.

The driver and the controller, in particular, must be

protected from high humidity to avoid corrosion and

short circuit.

Do Not Use Outdoors

Avoid using the instrument outdoors. Avoid exposure

to rain or moisture.

Power Supply

Make sure to use the supplied AC adapter. Use of

different adapters may cause damage not covered by

the warranty.

Handling

• Never place an object on or lean against the instru-

ment, as this may cause damage to the tone bars

and frame parts or topple the instrument, which is

extremely dangerous.

• Do not use hard orchestra bell mallets or other hard

objects on your vibes. The resulting dents or scratches

in the tone bars could impair the sound.

• Rough handling of the controller and/or the driver

may cause damage to the internal circuitry.

• Never try to disassemble the controller or driver, as

this may result in severe damage.

Moving and Transporting the Instrument

• Move the instrument carefully to avoid shocks. Be-

fore moving the instrument, make sure that the AC

adapter is disconnected and the caster brakes are

released. Also make sure to lift the instrument slightly

when moving over rough surfaces.

• When the instrument must be transported to a differ-

ent location make sure to fully disassemble it, taking

care to pack each component properly. Disassembly

steps are in the opposite order of assembly.

PRECAUTIONS

When Not in Use

• Make sure to turn off the power switch and discon-

nect the AC adapter from the outlet.

• Always engage the caster brakes.

Maintenance

The tone bars should be polished from time to time

using a soft and dry cloth or silicone cloth. Stains that

cannot be removed with a dry cloth may be wiped off

using a small amount of ethyl alcohol. Never use

thinner or benzene or a wet cloth for cleaning pur-

poses.

Keep This Manual for Future Reference

After reading, make sure to keep the manual in a safe

place.

• When assembling/disassembling the instru-

ment, make sure to follow the procedure out-

lined in this manual. Assembly in the wrong

order may impair the performance and func-

tionality of the instrument or cause noise.

• Make sure to adjust the wire clip positions

after assembly. (YV-3910/3710/3700: P. 17)

• Height adjustment of the striking surface (YV-

3910/3710/3700: P. 18, YV-2700/2700G/

1600A/520: P 25) should be performed by AT

LEAST 2 PERSONS.

• After final adjustment of the legs the fixing

screws must be tightened securely to prevent

loosening. Looseness may cause the instru-

ment to shift during performance and can also

cause noise and other problems. Retighten

the screws from time to time.

Assembly Cautions