Yamaha YVD10 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha YVD10. Yamaha YVD10 11 сторінок. Vibraphone variable-speed driver
Також для Yamaha YVD10: Посібник користувача (11 сторінок)

Друкувати сторінку

Connect the driver and the con-

troller.

Connect the driver cable to the driver

connection terminal on the control-

ler. Also, align the flat shape of the

connector of the cable with the

mark printed on the controller.

* Be careful not to break the pins of the cable.

 Controller

 Driver

Set the fan belt.

First, wrap the fan belt around the

vibraphone (fan) pulley, and then

twist and hook the fan belt on the

pulley of the driver.

If the distance between pulleys is too

wide to fit the belt, or if it is too nar-

row and the belt slips, first loosen the

wing nut and then adjust the tension

of the belt. After adjusting the ten-

sion, tighten the wing nut firmly.

YVD10 Owner's Manual

 Fan side

 Driver side

Cable

Fan belt

The assembly is now complete.

NOTE

When using for a long time, the fan belt will stretch

and the pulley will run idle. If this happens, adjust

the tension of the fan belt by slightly lowering the

mounting position of the driver unit.

Pulley

* Order a replacement fan belt (sold sepa-

rately) using the following number. When

ordering, please contact your dealer or quali-

fied Yamaha service personnel. Replace the

two fan belts at the same time.

Part No.

W5128070

Part name

Fan belt

3ØL236

Fan belt

Cup head square

neck bolt