Yamaha HTR-5920 Посібник користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник користувача для Приймач Yamaha HTR-5920. Yamaha HTR-5920 45 сторінок. Digital home theater system av receiver
Також для Yamaha HTR-5920: Посібник з експлуатації (38 сторінок)

Друкувати сторінку

Adjusting the surround parameters of

PLII MUSIC

1 While playing a source with PLII MUSIC, press

on the remote control to select "PANO"

(PANORAMA), "DIMEN" (DIMENSION) or "CT

WID" (CT WIDTH).

2 Press

on the remote control to adjust the

parameters.

PANO (PANORAMA)

Sends stereo signals to the surround speakers as well as

the front speakers for a wraparound effect.

Choices:

OFF, ON

Initial setting: OFF

DIMEN (DIMENSION)

Adjusts the surround sound either towards the front or

towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front)

Initial setting: STD (standard)

CT WID (CT WIDTH)

Adjusts the center image from all three front speakers to

varying degrees. A larger value adjusts the center image

towards the front left and right speakers.

Control range: 0 (center channel sound is output only from the

center speaker) to 7 (center channel sound is

output only from the front left and right speakers)

Initial setting: 3

Enjoying high fidelity stereo sound

Press STEREO on the front panel (or press

STEREO on the remote control) to select

"STEREO".

The sound effects are turned off and no sound is output

from the center speaker or surround speakers.

Press STEREO on the front panel (or STEREO on the

remote control) again to turn off the sound effects.

STEREO

EFFECT

Front panel

Notes

• If you turn off the sound effects while this unit is reproducing

sound from a Dolby Digital or DTS signal, the dynamic range

of the signal is automatically compressed and this unit mixes

the sounds of the center and surround speaker channels and

outputs them from the front speakers.

• The volume may be greatly reduced when you turn off the

sound effects. In this case, turn on the sound effects.

Night listening mode

The night listening mode is designed to improve

listenability at lower volumes or at night.

Press NIGHT on the remote control repeatedly to

select "NIGHT ON".

The NIGHT indicator in the front panel display lights up.

Select "NIGHT OFF" to turn off the night listening mode.

NIGHT

Notes

• You can use the night listening mode only with the Dolby

Digital sources.

• If you select the "STEREO" mode or if you connect the

headphones while multi-channel Dolby Digital source is

reproduced, the night listening mode is not available.

• The night listening mode may vary in effectiveness depending

on the input source and surround sound settings you use.

PLAYBACK

STEREO

Remote control