Yamaha A-S3000 Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha A-S3000. Yamaha A-S3000 36 сторінок. Integrated amplifier

■ Bi-wire connection

The bi-wire connection separates the woofer from the

combined midrange and tweeter section. A bi-wire

compatible speaker has four binding post terminals. These

two sets of terminals allow the speaker to be split into two

independent sections. This split connects the mid and high

frequency drivers to one set of terminals and the low

frequency driver to the other pair.

Example of a bi-wiring connection (L channel)

SPEAKERS L CH

A OR B:4 MIN./SPEAKER A + B:8 MIN./SPEAKER

Rear panel of A-S3000

Caution

To use the bi-wire connections, the impedance of each speaker

must be 8 Ω or higher.

Note

Remove the shorting bars or bridges to separate the LPF (low

pass filter) and HPF (high pass filter) crossovers.

To use the bi-wire connections, switch the SPEAKERS selector

to the A+B BI-WIRING position.

■ Connecting the power cable

Plug the power cable into the AC IN inlet when all

connections are complete, and then plug in the power

cable to the AC outlet.

Speaker

TTENUATOR

PHASE

ATTENUATOR

PASS

ATT.

NORMAL

INV.

BYPASS

ATT.

(-6dB)

TRIGGER

AC IN

Rear panel of A-S3000

Supplied power cable

to an AC outlet

PHASE

NORMAL

INV.