Yamaha A-U670 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha A-U670. Yamaha A-U670 47 сторінок.

ADJUSTING TO THE DESIRED SOUND (A-U670 ONLY)

ADJUSTING TO THE DESIRED SOUND (A-U670

n Reproducing pure, high fidelity sound (PURE DIRECT)

With the PURE DIRECT function on, the BASS, TREBLE, and BALANCE circuits are

bypassed to reduce noises. Therefore, in all input sources, you can enjoy music playback

in straight and high quality sound.

Press the PURE DIRECT button on the front panel to switch the PURE DIRECT function

on or off.

The PURE DIRECT indicator lights up when this function is turned on.

Notes

The BASS, TREBLE, and BALANCE controls do not function while the PURE DIRECT function is

turned on.

ONLY)

PURE DIRECT

Operation is available with the remote control of the network CD player (CD-NT670).

Check if the SYSTEM jacks of the unit and the network CD player are connected to each

other.

Pressing the

(power) button of the remote control causes the unit to turn on or enter the

standby mode by interlocking with the network CD player.

Even if the

(power) button on the unit is pressed, interlocking does not work. The unit and the

network CD player are independently turned on or enter the standby mode.

With either the unit or the network CD player on, if you press the

the unit will be turned on or enter the standby mode according to the status of the network CD player.

You can adjust the sound volume by pressing the VOLUME +/– buttons of the remote

control.

You can turn on or off mute by pressing the MUTE button on the remote control.

You can select USB as the input source of the unit by pressing the USB button of the

remote control (or rotate the INPUT knob of the connected network CD player).

(power) of the remote control,