Yamaha AG-Stomp Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha AG-Stomp. Yamaha AG-Stomp 32 сторінки. Yamaha accoustic guitar/pre-amplifier owner's manual
Також для Yamaha AG-Stomp: Посібник з експлуатації (45 сторінок), Список виправлень (1 сторінок), Посібник (нідерландська) (32 сторінок)

Друкувати сторінку

I Storing Patches

After editing or creating an original patch, your set-

tings can be stored in the USER AREA (U01-U93).

Try creating an original patch and store it.

G Storing Procedure

1. Press the [STORE] button.

When the Store Mode is entered, the display, the

STORE lamp and the Footswitch lamp that cor-

responds to the patch number will flash.

2. Select the patch (Bank and Patch Number) to

which you want to store the patch.

Use the same procedure as described in "Se-

lecting Patches" (page 17) to select the patch

number. You can also use the [UP]/[DOWN] but-

tons, Footswitches and BANK Switches to se-

lect the patch number. However, you cannot

change the AREA (data can only be written to

the USER AREA).

3. After selecting the patch number you want to

store your data in, hold the [STORE] button.

The store operation is complete when all the

lamps light.

* Utility mode settings are not stored in individual patches, they

are stored in the AG-Stomp's memory as common settings for

all parameters.

* The OUTPUT knob's setting is not stored in memory. Use the

Volume knob to set differences in volume for situations like

backing, soloing, etc.

* Data in the USER AREA (U01-U93) can be stored in an ex-

ternal MIDI device. (→ page 25)

* During the Store Operation, MIDI data can not be received.

The STORE operation is used not only to store your

original patches, but it can also be used to rearrange

your patches in an order suitable for use during live

performance.

Using the AG-Stomp

I Other Convenient Functions

Here are some other convenient functions that you

can use with the AG-Stomp.

G Use Footswitches 1-3 to Switch the

Effects ON/OFF

Footswitch 1 can be used to act as an ON/OFF

switch for the Limiter, Footswitch 2 as an ON/OFF

switch for the Chorus/Delay Effect and Footswitch 3

as an ON/OFF switch for the Reverb Effect.

Limiter

Chorus/

Delay Effect

1. Press the [UTILITY] button and set the MIC TYPE

Select Switch to CONDENSER 1.

After entering the Utility Mode, "

in the display followed by the currently selected

Footswitch Function.

PrG

•

: Select a patch

EFF

•

: Switch the effect block ON/OFF

2. Use the [UP]/[DOWN] buttons to set the

Footswitch Function to "

3. Press the [UTILITY] button to return to the Play

Mode.

4. Now, pressing Footswitches 1-3 will switch the

corresponding effect ON/OFF.

* To select a different Bank or Area, press and hold the BANK

switch until the display and the Footswitch Lamp flashes. (→

page 18)

Reverb

Effect

F. S

" will appear

EFF