Yamaha CX-A5200 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha CX-A5200. Yamaha CX-A5200 28 сторінок. Av
Також для Yamaha CX-A5200: Приклад підключення (2 сторінок)
Друкувати сторінку
Using a Y-shaped lug connector
a Loosen the speaker terminal.
b Insert the Y-shaped lug connector into the groove between the knob and base part of the
terminal.
c Tighten the terminal.
b b
Use a Y-shaped lug with
the following size.
a a
6.5 mm
(0.26 in)
or more
16
Connections
En
c c
Connecting the power cable
After all the connections and switch operations are complete, connect the supplied power cable
to the unit and then to an AC wall outlet.
The unit (rear)
SURROUND
ASSIGN
CH.4 AMP ASSIGN
CH.6 AMP ASSIGN
CH.3
CH.3
BRIDGE
CH.5
BRIDGE
CH.4
(
)
FRONT
CH.2
CH.4
CH.6
PRESENCE
SURROUND
FRONT
REAR
BACK
PRESENCE
PRESENCE
L
L
L
BRIDGE
A
(
)
CH.3
FRONT
B
CH.2
SURROUND
AC IN
BACK
To an AC wall outlet
Turning on/off the unit
Press z (power) to turn on/off the unit.
When the unit is turned on, the power indicator lights up.
The unit (front)
z (power)
• When an external device is connected to the TRIGGER IN jack, the unit is set to standby mode after z (power) is
pressed. If you turn on the external device, the unit automatically turns on by the trigger function (p.18).