Yamaha CX-A5200 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Yamaha CX-A5200. Yamaha CX-A5200 28 сторінок. Av
Також для Yamaha CX-A5200: Приклад підключення (2 сторінок)

Друкувати сторінку

Features

High-quality power amplifier

■ High output/high audio-quality

amplifier (150 W x 11 channels)

The unit provides an 11-channel power amplifier featuring a

three-stage Darlington current feedback circuit, with a power

supply that uses the same type of toroidal transformer used in

top-level hi-fi audio devices. The gold-plated speaker

connectors are also of the highest quality, delivering

high-grade sound.

■ Balance and unbalanced

connections are supported

Balanced (XLR) and unbalanced (RCA) input jacks are provided

on all channels, and can be selected independently for each

channel.

Balanced connections minimize the extraneous noise that can

arise in the cable connection between the unit and the

pre-amplifier, ensuring high-fidelity transmission of the audio

signal.

Unbalanced connections utilize ground-sensing to achieve

fidelity that is close to balanced transmission.

■ Chassis structure that maximizes

the potential of the unit's

performance

The chassis features a special structure that allows the full

potential of the high-quality power amplifier's potential to be

revealed.

• Symmetrical power amplifier design

• Aluminum front panel and side panels

• Extremely stable feet utilizing the A.R.T. (Anti-Resonance

Technology)

Features

Expandable to meet diverse needs

■ Freedom for speaker placement

Since power amplifiers of the identical specification are

provided for all 11 channels, you use the unit not only for

constructing a home theater setup of up to 11 channels but

also for multi-room systems or any other speaker

configuration to meet your needs.

Pre-amplifier

■ Support for bi-amp connections/

bridge connection and

multi-speaker playback

The unit provides a channel selector function that lets you

utilize bi-amp connections /bridge connection or

multi-speaker connections without having to connect

additional cables from your pre-amplifier. Output the CH.3

input signals from both the CH.3 and CH.4 speaker terminals

to realize a high sound quality bi-amp drive, or bridge the front

speakers to enjoy high-powered sound.

You can also output a CH.1 (monaural) input signal from the

three speakers connected to CH.1, CH.2 (L) and CH.2 (R).

■ Switch the unit's power from your

pre-amplifier (trigger function)

The unit can switch its own power status in synchronization

with power switching operations on another device that

supports the trigger function, such as an AV pre-amplifier

(TRIGGER IN). The input signal from the TRIGGER IN jack can

also be output without change in a cascade connection to

switch the power of another device such as a Yamaha

subwoofer (THROUGH OUT). In addition, another device can

be switched in synchronization when the power of the unit is

switched (TRIGGER OUT), allowing you to set up a variety of

systems with synchronized power switching.