Yamaha THR10II Wireless Довідковий посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Довідковий посібник для Підсилювач Yamaha THR10II Wireless. Yamaha THR10II Wireless 20 сторінок.
Також для Yamaha THR10II Wireless: Короткий посібник (2 сторінок)
Друкувати сторінку
Tap Tempo Function
When an ECHO or ECHO/REV effect is selected with the [ECHO/REV] knob !2 control, the tempo of the
delay can be set by tapping (more than twice) on the switch.
Extended Stereo Setting
Hold the switch for more than three seconds to switch the Extended Stereo* function ON/OFF.
ON: "#" on LED Display w is off (default setting).
OFF: "#" on LED Display w is lit.
* Extended Stereo: The Extended Stereo function produces a much wider stereo field. Extended Stereo affects the sounds
from the [AUX] jack, [USB] jack and Bluetooth as well as the guitar sounds with reverb effects applied.
* The Extended Stereo setting (ON/OFF) is saved when the power is turned OFF.
r [AMP] knob
Selects the amp type. The lamp for the corresponding amp type lights.
* When the power is turned ON, the most recent amp type is selected.
Tips on Creating Sound
Using the [GAIN] knob y and [MASTER] knob u in combination gives you broad control over the sound for
each amp type, except ACO and FLAT. Setting the [GAIN] knob and [MASTER] knob properly provides the
desired amount of distortion on the power amp. Once you have the desired sound, use the [GUITAR] knob !3
to set the overall volume of the guitar sound.
t [AMP] switch (THR30II Wireless only)
Selects the amp mode. Selects the amp modeling by combination of amp mode and amp type. The [AMP]
knob r lamp lights for the corresponding amp mode color.
For further details of amp modeling settings that can be selected by combining the amp mode and amp type,
refer to the Amp Modeling List
y [GAIN] knob
Adjusts the amount of guitar distortion. Turn the knob to the right to increase the amount of distortion.
* When ACO is selected with the [AMP] knob
of an acoustic electric guitar. (Minimum setting produces the direct pickup sound only. Maximum setting produces the mic
sound only.)
u [MASTER] knob
Adjusts the volume for the guitar sound. Turn the knob to the right to increase the volume and create power
amp distortion and change in the low-range frequency.
* When BASS, ACO or FLAT is selected with the [AMP] knob
i [BASS] knob
Tone adjustment for the guitar's sound. Turn the knob to the right to enhance the low-range frequencies.
o [MIDDLE] knob
Tone adjustment for the guitar's sound. Turn the knob to the right to enhance the mid-range frequencies.
!0 [TREBLE] knob
Tone adjustment for the guitar's sound. Turn the knob to the right to enhance the high-range frequencies.
!1 [EFFECT] knob
Selects one of four different effects: CHORUS, FLANGER, PHASER, or TREMOLO. Turn the knob to the right
to increase the amount of each effect.
* Turn the knob fully to the left to set the effect OFF.
(page
19)
r
, the modeled sound is a mixture of the front-mic'd sound and pickup sound
r
THR30II Wireless THR10II Wireless THR10II
, this only adjusts the volume.
Names and Functions
Reference Manual
4