Yamaha ATS-930 Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Yamaha ATS-930. Yamaha ATS-930 17 сторінок. Front

Друкувати сторінку

Connections

Connect to a TV (or other peripheral device).

CAUTIONS

• Do not connect the power cable of the sound bar to the AC wall outlet before making

connections.

• Do not use excessive force when inserting the cable plug. Doing so may damage the

cable plug or AC wall outlet.

Connect the TV and sound bar with the optical

cable (supplied).

Remove the cap of the optical cable and check the

direction of the plug.

Connect the power cable of the sound bar to an

AC wall outlet.

Set the TV as follows.

• Set the TV volume to minimum.

• Disable the TV built-in speaker output (if available).

HINT

• If a setting to disable the speaker output is not available on your TV, you may disable it

by connecting headphones to the headphone jack on the TV. For details, refer to the

manuals of the TV.

• The TV, BD/DVD and COAXIAL input jacks support the following audio signals.

− PCM (2 channel)

− Dolby Digital (up to 5.1 channel)

− DTS Digital Surround (up to 5.1 channel)

Sound bar (rear)

Optical cable

OPTICAL OUTPUT

HDMI cable (etc.)

Playback device (such as a BD player)

Set top box

Power cable

To AC wall outlet

HINT

In the following cases, connect the optical

output of the playback device to the BD/DVD

input of the sound bar with an optical cable

(commercially available), then select the BD/

DVD key on the remote control for the input

source.

− The TV does not have an optical output.

− The TV does not output audio (or outputs

low volume audio) from the connected

playback device.

− The audio from the playback device

connected to the TV cannot be heard as

surround sound.

OPTICAL OUTPUT