Yamaha CMA3SB Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система Yamaha CMA3SB. Yamaha CMA3SB 36 сторінок.
Також для Yamaha CMA3SB: Посібник користувача (24 сторінок)
Друкувати сторінку
Connections
Connect the power amplifier and the VXS3S
Connect the OUTPUT of the power amplifier to the INPUT of the
subwoofer.
Power amplifier
INPUT
＋
－
6
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
INPUT
Set the line voltage/impedance and power
Select the line voltage/impedance (70V/8Ω) and input wattage power tap
when using a 70V line distributed system.
NOTICE
• When using a low impedance connection, set the tap selector switch to the "8Ω"
position. Check the impedance shown around the tap selector switch, according to the
number of satellite speakers connected.
• When connecting speakers with high impedance, check the tap selector switch
settings indicated around the switch, and then set the tap according to the number of
satellite speaker connections (NONE/×2/×4) and the output (W).
Make sure that the input total of each speaker does not exceed the rated output of the
power amplifier.
• Do not set the tap selector switch to the "X" position.
If the setting is incorrect, it may cause malfunction of the speaker and amplifier.
• Make sure the amplifier is switched off before operating the tap selector switch.
High impedance connection
-Satellite speakers (NONE/×4)
Low impedance connection
-Satellite speakers (NONE/×2/×4)
High impedance connection
-Satellite speakers (×2)