Clark Synthesis TST209 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перетворювач Clark Synthesis TST209. Clark Synthesis TST209 16 сторінок.

SUPPLIED/REQUIRED/OPTIONAL ITEMS

SUPPLIED PARTS (ILLUSTRATED BELOW)

A. (1) TST209 Transducer

B. (1) Unimount Bracket

C. (1) 3/8"-16 x 3" Hanger Bolt

D. (1) 3/8"-16 x 3" Threaded Stud

E. (1) 3/8"-16 x 1.5" Threaded Stud

F. (1) 3/8"-16 x 1" Hex Bolt

G. (4) #12 x 1" Screw

H. (2) 3/8" Jam Nut

I. (4) #12 Washer

J. (4) #12 Lock Washer

K. (1) 3/8" Washer

L. (1) 3/8" Lock Washer

M. (1) T-Nut

• Installation Guide

TST209 Transducer

REQUIRED TOOLS AND MATERIALS

Depending on your application, you

will need some or all of these tools and

materials for your installation:

• #2 Phillips Screwdriver

• (2) 9/16" Open-Ended Wrenches

• Drill

• Saw

• Wire Stripper

• Soldering Gun or Wire Nuts

• Adhesive (construction glue)

• Hardwood (oak, maple, ash, etc., not

pine or softwoods) for creating mounting

bridges

• Speaker Cable (min. 16 AWG; 12-14

AWG recommended)

Side View

3-D View

Front View