Clark Synthesis TST239-Silver Посібник з монтажу - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перетворювач Clark Synthesis TST239-Silver. Clark Synthesis TST239-Silver 20 сторінок. Platinum, gold, silver and all weather transducers
Також для Clark Synthesis TST239-Silver: Посібник з монтажу (8 сторінок)
Друкувати сторінкуRight Front (RF) and Left Front (LF) Hookup
For this hookup, connect the RF and LF Pre-Amp Outputs to the amplifier inputs.
NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs. If you
have a question about your receiver's outputs, please consult your owner's manual or contact your
receiver's manufacturer.
Amplifier
(100 - 150
Watts into
4 ohms)
Transducer
Multiple Signal Hookup
This configuration is a little more complicated. You will need a small mixer to make this work.
Connect the signals you want to use to the mixer input. Then, connect the mixer output to the
amplifier input using a "Y" adapter.
Amplifier
(100 - 150
Watts into
4 ohms)
Transducer
www.clarksynthesis.com
Surround-Sound Receiver
L
R
OUT
IN
–
+
Output
L
R
OUT
IN
–
+
Output
Y Adapter
Wiring & Connections
Pre-Amp Audio Out
LF
RF
Surround-Sound Receiver
Pre-Amp Audio Out
LF
CENTER
CH1
CH2
OUTPUT
Mixer
Tactile Sound Transducers
RF
LFE/SUB
CH3
CH4
15