Clarke 4500658 Інструкція з експлуатації та обслуговування - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Електроінструмент Clarke 4500658. Clarke 4500658 17 сторінок. 18v cordless impact wrench
Друкувати сторінку
NOTE: On the rear of the
battery are 3 red power
indicator lights. Press the
power indicator button
to show how much
power the battery has.
• 1 Light: Low power
• 2 Lights: Medium power
• 3 Lights: High power
The battery pack should slide in easily. If it is not to be fitted immediately,
ensure that the metal contacts are protected to avoid the possibility of a short
circuit which would cause battery damage. For maximum battery life, we
recommend that you maintain the battery in a fully charged state.
OPERATION
CAUTION: MAKE SURE THAT THE IMPACT WRENCH IS OFF USING THE
SELECTOR BAR BEFORE ATTACHING OR REMOVING A SOCKET. ALWAYS
TAKE CARE TO USE THE CORRECT SIZE SOCKET FOR BOLTS AND NUTS. AN
INCORRECT SOCKET WILL CAUSE DAMAGE TO THE BOLT OR NUT.
FITTING A SOCKET
1. Align the chosen socket and
simply push it onto the anvil. Use
only ½" square drive impact
sockets as listed on page 11.
2. Select Forward or Reverse on the
selector bar.
3. Squeeze the trigger to start the
impact wrench. Release the
trigger to stop.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9