Clarke 7640300 Інструкція з експлуатації та технічного обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Електроінструмент Clarke 7640300. Clarke 7640300 13 сторінок. 12v cordless tyre inflator
Друкувати сторінку
WORKING CONDITIONS
1. DO NOT use the tyre inflator in a damp or wet environment. The compressor
should only be used with good ventilation. There should be no dust, acids,
vapour, explosive or flammable gases in the room.
2. DO NOT cover the tyre inflator. Always position it with good all-round air
ventilation and that the air intake air is dry and dust free.
POWERING THE TYRE INFLATOR
NOTE: 230V mains + USB charges the battery,
Car charger charges the 12V power pack
USING THE BATTERY
Charge the battery using the 230V
mains power supply adaptor cable.
Connect one end to the battery
pack and the other end to any mains
power socket. The 3 x LED bars will all
be illuminated when the battery is
fully charged.
Fit the power pack to the base of the
tyre inflator by sliding it forward until it
clips into place.
NOTE: The base of the power pack can only slide one way.
USING A USB CABLE
Charge the battery using a USB cable (not supplied) via the USB port.
USING THE CAR CHARGER VIA THE POWER PACK
Power the tyre inflator directly from
the vehicle 12V power pack using the
car adaptor.
Fit the adaptor to the base of the tyre
inflator by sliding it forward until it
clips into place.
NOTE: The vehicle adaptor can
only slide one way.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6