Clarke CONTRACTOR CON800 Інструкція з експлуатації та обслуговування - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Електроінструмент Clarke CONTRACTOR CON800. Clarke CONTRACTOR CON800 17 сторінок. 800w jigsaw with laser
Друкувати сторінку
OPERATION
ON/OFF SWITCH
1.
Squeeze the trigger switch.
The jigsaw will run at the level
selected with the variable speed
selector.
2.
To switch off the jigsaw, release the
trigger switch. When the blade has
stopped remove it from the
workpiece
WARNING!
The blade will continue to run for a short period after the trigger has
been release. Wait until it stops before removing it from the
workpiece.
For continuous operation,
1.
Squeeze and hold the trigger switch.
2.
Press the lock-on button and release
the trigger switch.
3.
To release the lock-on button,
squeeze the trigger switch and then
release the trigger switch
LASER GUIDE
The laser guide is designed to help you
keep the blade aligned with the cutting
line.
1.
The laser guide is operated by
pressing the Laser on/off button.
• DO NOT allow children or untrained
personnel to use this product or the
laser guide. It is not a toy!
• DO NOT aim the laser beam at people.
• KEEP the laser beam below eye level where practical.
• This product uses a Class 2 laser. There are no user serviceable parts.
Fig 8
Fig 9
Fig 10
Laser
On/Off
button
10
Trigger
switch
Lock-on button
Trigger
switch