Clarke CPSB100B Інструкція з експлуатації та технічного обслуговування - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Електроінструмент Clarke CPSB100B. Clarke CPSB100B 17 сторінок.
Друкувати сторінку
2. Unscrew the filter as shown in Fig
20 and wipe clean.
NOTE: Do not use harsh or abrasive
chemicals when cleaning
the condensation chamber.
3. Refit the condensation chamber.
REPLACING THE NOZZLE
NOTE: ONLY use identical replacement parts when servicing.
After l0-l2 hours of blasting time the nozzle should be checked for wear. The
nozzle will wear out over time and should be replaced when the hole is no
longer round or the abrasive media does not flow smoothly through. To
replace the nozzle:
• Refer to page 14 for the following replacement parts.
1. Disconnect the sandblasting gun from the air hose.
2. Unscrew the nozzle adapter (38), located at the front of the sandblasting
gun.
3. Remove the old nozzle (37).
4. lnsert the new nozzle.
• A pack of 4 replacement nozzles are available from your Clarke
dealer: Part number 7640132.
5. Replace the nozzle adapter (38) and firmly screw it onto the gun.
• Keep your sandblaster clean and protect it from damage.
• Check for a worn abrasive material hose and fittings. Watch for
leaks, blistering, bulging or thinning of the hose.
• Replace any parts which appear worn.
SUITABLE ABRASIVES AVAILABLE FROM YOUR CLARKE STOCKIST
Aluminium Oxide
Powder
Glass Bead Abrasive
Soda Blast Abrasive
Garnett Abrasive
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
60
60-80
22kg
20kg
3052070 3052110 3052100 3052075 3052105 3052080
3052095 20kg
3052805 7.5kg
3052090 22kg
12
Fig 20
60-80
80
7.5kg
22kg
3052800 22kg
80-120
120
7.5kg
22kg