Clarke CRT 40 Інструкція користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція користувача для Електроінструмент Clarke CRT 40. Clarke CRT 40 13 сторінок. 40-piece rotary tool kit
Також для Clarke CRT 40: Інструкція користувача (6 сторінок)

Друкувати сторінку
Clarke CRT 40 Інструкція користувача
ASSEMBLY OF COMPONENTS
1.
STAND FOR THE ROTARY TOOL
Screw the telescopic tube into the bracket and tighten.
Clamp the bracket to a workbench or worktop with a
maximum thickness at 2-1/8".
Slacken the top tube by turning the black knob anticlockwise (-).
Draw the tube out to its maximum height and secure it by
turning the knob clockwise (+).
Turn the middle tube anticlockwise (-) and extend as required.
Lock in position by turning the tube clockwise (+).
The Rotary Tool can now be supported by the suspension
bracket of the stand as shown. (the suspension bracket
can be turned 360
2.
ASSEMBLING ACCESSORIES TO THE TOOL
IMPORTANT: Ensure the tool is switched OFF at the
mains supply and at the tool switch.
•
Press down on the drive shaft locking button (2),
and hold down.
•
Undo the chuck (1) using the spanner provided.
•
Insert the mandrel of the tool to be used in to the
chuck FULLY and tighten the chuck.
3.
ASSEMBLING DISCS & GRINDING STONES TO THE MANDREL
•
Mount the selected disc on to the mandrel as shown,
ensuring the two washers are in place.
DO NOT overtighten the screw.
O
).
5