Directed Directechs DB3 Посібник з монтажу - Сторінка 17

Друкувати сторінку

Directed Directechs DB3 Посібник з монтажу

Quick Reference Guide

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,

there are 3 possible ways you can send commands to your vehicle, using the:

•

Factory remote.

•

Aftermarket remote.

•

Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3

times quickly on your factory remote.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press

the Remote Start button on the transmitter to start the

vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory

remote is inside with you.

Depress the brake pedal for a minimum of 3 seconds,

put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their

Push-to-Start (PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press

the PTS button to perform a takeover. There is therefore a physical action required

to drive away. With Get In and Go, you simply remote start the vehicle, unlock the

doors, get in and go... All that's left to do is put the gear in drive and drive off.

403.NISS06 3.27 2016 Nissan Rogue (Smart Key)

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the

gear in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the

vehicle is now in Pit Stop Mode.

It is safe to leave the engine running and exit the

vehicle with the factory remote in hand.

Note: We recommend that you always lock the

doors of your vehicle when leaving it unattended.

Press Remote

Start button*

* Icon and remote appearance may differ depending on the model purchased.

List of available commands

Press Unlock on

either remote*

Note that the information below is for many Viper, Clifford, Python, Avital, Automate,

Autostart and AstroStart models. Icons and commands may differ depending on the

model and options purchased. Refer to your authorized installation center for more

specific information.

14:36

Button(s)

Enter vehicle

with remote

Ready to

drive off

* Icon and remote appearance may differ depending on the model purchased.

14:36

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote