Zanussi ZBA15021SA Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Холодильник Zanussi ZBA15021SA. Zanussi ZBA15021SA 40 сторінок.
Також для Zanussi ZBA15021SA: Посібник користувача (40 сторінок), Посібник користувача (12 сторінок), Посібник користувача (49 сторінок)

Друкувати сторінку

During transportation and installation of the

appliance, be certain that none of the com-

ponents of the refrigerant circuit become

damaged.

If the refrigerant circuit should become

damaged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the

appliance is situated

• It is dangerous to alter the specifications or

modify this product in any way. Any damage

to the cord may cause a short-circuit, fire

and/or electric shock.

Warning! Any electrical component

(power cord, plug, compressor) must be

replaced by a certified service agent or quali-

fied service personnel to avoid hazard.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back of

the appliance. A squashed or damaged

power plug may overheat and cause a

fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not

insert the power plug. There is a risk of

electric shock or fire.

6. You must not operate the appliance

without the lamp cover (if foreseen) of

interior lighting.

• This appliance is heavy. Care should be tak-

en when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are

damp/wet, as this could cause skin abra-

sions or frost/freezer burns.

• Avoid prolonged exposure of the appliance

to direct sunlight.

• Bulb lamps (if foreseen) used in this appli-

ance are special purpose lamps selected for

household appliances use only. They are not

suitable for household room illumination.

Daily use

• Do not put hot pot on the plastic parts in the

appliance.

• Do not store flammable gas and liquid in the

appliance, because they may explode.

• Appliance's manufacturers storage recom-

mendations should be strictly adhered to.

Refer to relevant instructions.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Do not clean the appliance with metal ob-

jects.

• Regularly examine the drain in the refrigera-

tor for defrosted water. If necessary, clean

the drain. If the drain is blocked, water will

collect in the bottom of the appliance.

Installation

Important! For electrical connection carefully

follow the instructions given in specific

paragraphs.

• Unpack the appliance and check if there are

damages on it. Do not connect the appli-

ance if it is damaged. Report possible dam-

ages immediately to the place you bought it.

In that case retain packing.

• It is advisable to wait at least four hours be-

fore connecting the appliance to allow the

oil to flow back in the compressor.

• Adequate air circulation should be around

the appliance, lacking this leads to over-

heating. To achieve sufficient ventilation fol-

low the instructions relevant to installation.

• Wherever possible the back of the product

should be against a wall to avoid touching

or catching warm parts (compressor, con-

denser) to prevent possible burn.

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

• Connect to potable water supply only (If a

water connection is foreseen).