Zanussi ZFC 56 LAL Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник Zanussi ZFC 56 LAL. Zanussi ZFC 56 LAL 16 сторінок. Refrigerator
Також для Zanussi ZFC 56 LAL: Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
OPERATION
Setting the temperature
The temperature inside the refrigerator is
regulated by a thermostat with 6 temperature
positions and one «OFF» (©) position.
Position
1 = minimum coldness
Position 6 = maximum coldness
Turn the thermostat dial to the required position;
the intermediate position is usually the most suitable (3-4).
The thermostat setting can vary as the
temperature inside the refrigeration compartment
depends on the following factors:
— room temperature
— how often the door is opened
— how much food is stored
— position of the appliance
Important
If the fridge is not defrosting correctly, it is
possible that because a very low temperature has
been selected, the motor is working continuously,
which prevents the defrost cycle from operating.
To ensure correct defrosting, a lower number
should be selected on the thermostat and you
should notice that the motor cuts out from time to
time, which is correct.
If you wish to return to a lower temperature, turn
the thermostat to a higher number, however you
should turn the setting lower occasionally to allow
automatic defrosting.