Zanussi ZI 919 KA Інструкція з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник Zanussi ZI 919 KA. Zanussi ZI 919 KA 13 сторінок.

Position the runners (A) at the top and bottom of the

inside of the kitchen unit as shown in Fig. and mark

the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3.5x16 mm screws.

PR33

8mm

Open both the appliance door and that of the kitchen

unit to approx. 90¡. Place the little plates over the

runners. Hold the doors of the appliance and the unit

together and mark the holes.

PR34

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little platee over the

runners and screw in the screws provided (3.5x16

mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes. At the end of the procedure, check that the

doors of the appliance and the kitchen unit open

properly.

PR35

If the appliance is to be fitted laterally to the kitchen

unit, it will be sufficient to loosen the screws of the

little plates (D), move them as shown in Fig. and

then fasten them up again. Fit the cover (E).

D734