Zanussi ZKR 60/30 R Інструкція з експлуатації - Сторінка 20

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник Zanussi ZKR 60/30 R. Zanussi ZKR 60/30 R 21 сторінка. Zanussi instruction refrigerator- freezer zkr 60/30 r

Друкувати сторінку

Door reversal directions

1. Disconnect from the electricity supply.

2. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3

inches) of packing;

3. Remove the ventilation grill (D).

4. Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

5. Unscrew the bottom hinge (E).

6. Remove the freezer door by releasing it from the

middle hinge (H).

7. Unscrew the middle hinge.

8. Remove the fridge door by releasing it from the

top hinge pin (A).

9. Remove the pin and the washer (A+B) from the

top hinge (C), then mount these on the side, after

having removed the small plugs (I) which should

then be fitted on the opposite side.

10.Refit the fridge door and replace the middle hinge

to the left hand side.

11. Replace the door and bottom hinge (E) on the

opposite side.

12.Refit the grill (D) to the base of the product.

The doors can be aligned by adjusting both the

middle hinge and the top hinges.

The middle hinge can be adjusted horizontally, after

having slackened the two screws with a screwdriver.

The top hinge is adjusted by slackening the nut with

a 10 mm spanner and then proceeding as shown in

the figure.

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

PR19

Printed on recycled paper