Zanussi ZPC 426 DM Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник Zanussi ZPC 426 DM. Zanussi ZPC 426 DM 10 сторінок.

D151

Fitting door panels

To ﬁt the door panel, proceed as follows:

Loosen the screws ﬁxing the side frame (Fig. 4);

loosen all the other screws ﬁxing the door frame;

insert the panel from the side on which the frame

has been removed and push it through;

reﬁt the frame on the door again and tighten all the

screws.

Note:

The panel size should be 1-2 mm lower than the

door; the maximum panel thickness should be 4 mm.

Fig. 3

Fig. 4

The housing dimensions should be as follows:

Height

1446 mm

Minimum depth

550 mm

Minimum width

560 mm

Cooling air comes in through the ventilation grid at

the bottom of the appliance. To ensure air

circulation, leave a ventilation gap at the back of the

appliance, having the following dimensions:

depth: 50 mm, width: 540 mm (Fig. 5).

A similar gap must also be left in the top of the

kitchen furniture.

Remove the two spacer bushes (A) then ﬁt the

appliance into the recess in the tall kitchen unit.

Using the four screws supplied with the appliance,

secure the four corners of the appliance cabinet

hinge to the tall kitchen unit.

D152

Fig. 5

1446