Zanussi ZRT724W Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Холодильник Zanussi ZRT724W. Zanussi ZRT724W 37 сторінок. Fridge freezer
Також для Zanussi ZRT724W: Посібник користувача (37 сторінок)

Друкувати сторінку

Location

The appliance should be installed well away from sour-

ces of heat such as radiators, boilers, direct sunlight

etc. Ensure that air can circulate freely around the back

of the cabinet. To ensure best performance, if the appli-

ance is positioned below an overhanging wall unit, the

minimum distance between the top of the cabinet and

the wall unit must be at least 100 mm . Ideally, howev-

er, the appliance should not be positioned below over-

hanging wall units. Accurate levelling is ensured by one

or more adjustable feet at the base of the cabinet.

If the cabinet is placed in a corner and the side with the

hinges facing the wall, the distance between the wall

and the cabinet must be at least 10 mm to allow the

door to open enough so that the shelves can be removed.

Door reversibility

Important! To carry out the following operations, we

suggest that this be made with another person that will

keep a firm hold on the doors of the appliance during

the operations.

1. Remove the plug from

the power socket.

2. Open the door of the

freezer. Loosen the hinge.

3. Remove the doors by

pulling them slightly and

remove the hinge.

Warning!

It must be possible to dis-

connect the appliance from

the mains power supply;

the plug must therefore be

easily accessible after in-

stallation.

To change the opening direction of the door, do these

steps:

4. On the opposite side, re-

move the hole covers.

5. Unscrew both adjusta-

ble feet and the screws of

the bottom door hinge. Re-

move the bottom door

hinge and install it on the

opposite side.