Clarke ZX-R Pro Series Інструкція з експлуатації та технічного обслуговування - Сторінка 4

• Do not place any object on top of charger or place the charger on

a soft surface that might block the ventilation slots and result in

excessive internal heat. Place the charger in a position away from

any heat source. The charger is ventilated through slots in the top

and the bottom of the housing.

• Do not operate charger with damaged cord or plug — have them

replaced immediately.

• Do not disassemble charger; take it to an authorised service centre

when service or repair is required. Incorrect reassembly may result in

a risk of electric shock, electrocution or fire.

• In case of damaged power supply cord the supply cord must be

replaced immediately by the manufacturer, its service agent or

similar qualified person to prevent any hazard.

• Disconnect the charger from the outlet before attempting any

cleaning. This will reduce the risk of electric shock. Removing the

battery pack will not reduce this risk.

• The charger is designed to operate on standard 230V household

electrical power. Do not attempt to use it on any other voltage.

SAFETY SYMBOLS

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Read instruction

manual before use

Class II Double

Insulated

CE Mark

Weee Symbol

Indoor Use Only

Thermal Fuse Fitted

Isolation Transformer

Do not submerge in

water