Zanussi 132973860 Посібник користувача - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник користувача для Пральна машина Zanussi 132973860. Zanussi 132973860 32 сторінки. Zanussi washing machine user manual

Друкувати сторінку

Installation instruction

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever

has to be transported again.

1. After removing all the packaging, carefully

lay machine on it's back to remove the

polystyrene base from the bottom.

2. Remove the power supply cable and the

draining hose from the hose holders on the

rear of the appliance.

3. With a suitable spanner unscrew and

remove the central rear bolt A.

4. Unscrew and remove the two large rear

bolts B and the six smaller bolts C.

5. Remove the bracket D, refit the six smaller

6. Open the porthole, take out the inlet hose

7. Fill the smaller upper hole and the two large

Positioning

Install the machine on a flat hard floor. Make

sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that

the machine does not touch the wall or other

kitchen units. Level the washing machine by

raising or lowering the feet. The feet may be

tight to adjust as they incorporate a self locking

nut, but the machine MUST be level and

stable.

If necessary, check the setting with a spirit

level.

Any necessary adjustment can be made with a

spanner.

Accurate levelling prevents vibration, noise and

displacement of the machine during

operation.Never place cardboard, wood or

similar materials under the machine to

compensate for any unevenness in the floor.

bolts C and slide out the relevant plastic

spacer E.

from the drum and remove the polystyrene

block fitted with the adhesive tape on the

door seal.Open the porthole, take out the

inlet hose from the drum and remove the

polystyrene block fitted with the adhesive

tape on the door seal.

ones with the corresponding plastic plug

caps supplied in the bag containing the

instruction booklet.